Print Page | Close Window

GM side mount battery terminals

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88619
Printed Date: May 14, 2025 at 7:40 PM


Topic: GM side mount battery terminals

Posted By: yellowsocks34
Subject: GM side mount battery terminals
Date Posted: January 09, 2007 at 2:08 AM

Which one of these posts would allow for me to use the factory positive wire (starter, fuse box hooked together in molded connection to a screw in the battery) I will be using 2 ring terminals on the top for the alternator and amp wires.

https://www.crutchfield.com/S-ioZSTjHtGSZ/cgi-bin/ProdView.asp?g=713&tab=essential_info&i=211BASML#Tab

https://www.crutchfield.com/S-ioZSTjHtGSZ/cgi-bin/ProdView.asp?g=713&I=211BASMS - it looks like all i would have to do is remove the factory screw from the battery and molded connection and put this one in its place.

https://www.crutchfield.com/S-ioZSTjHtGSZ/cgi-bin/ProdView.asp?g=713&tab=detailed_info&i=211BAGMT#Tab




Replies:

Posted By: outtaluck72
Date Posted: January 09, 2007 at 8:39 AM
the BASMS will work. the other longer side mount adapter is for trucks that have dual batteries or other accessories added to the battery and they use a double molded harness.



Posted By: yellowsocks34
Date Posted: January 09, 2007 at 5:53 PM
so that one will allow me to make no changes to the factory setup other than removing the bolt that screws into the battery?? thanks.


Print Page | Close Window