turn-on leads for mono channel sub amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88756
Printed Date: May 02, 2024 at 2:12 AM

Topic: turn-on leads for mono channel sub amp

Posted By: gedukas.b
Subject: turn-on leads for mono channel sub amp
Date Posted: January 11, 2007 at 5:01 AM

I'm working on a 1991 mazda 323 audio system with infinity component speakers, a sony explod amp for 400W RMS subs, all run through a sony cdx gt100 receiver(is that the correct term?)

Do turn-on lead cables from my sub's amp get crimped or soldered with Constant 12V+ or the Switched 12V+.

Replies:

Posted By: coppellstereo
Date Posted: January 11, 2007 at 10:37 AM

switched. see if your receiver has a remote turn on lead - typically blue with white stripe

we just crimp

-------------

Posted By: soultinter
Date Posted: January 11, 2007 at 11:05 AM

definitely use the turn-on lead from your head unit

Posted By: gedukas.b
Date Posted: January 11, 2007 at 1:05 PM

thx a lot for the help. It was blue. stupid circuit city workers had cut the turn on lead when they "factory installed" the sony radio and decided to cut the connection from the turn on lead to the radio.

once again, thank you

Print Page | Close Window