twisted pair wiring

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=88850
Printed Date: February 17, 2026 at 12:30 AM

Topic: twisted pair wiring

Posted By: rs6330
Subject: twisted pair wiring
Date Posted: January 12, 2007 at 9:48 PM

hi there,
i am searching for information on twisted pair wiring as used in Can bus equipped vehicles. i modify vehicles and with a current project need to reroute the cabin rear wiring loom and to do this i need to lengthen the loom. there are 4 pair of twisted wires to the rear area module. can anyone offer advice on this? many thanks

Replies:

Posted By: KPierson
Date Posted: January 13, 2007 at 8:40 AM

If it is twisted pair from the factory use twisted pair to extend it.

If it is shielded from the factory use a shielded wire to extend it.

Beldon makes all kinds of twisted/shielded wire.

-------------
Kevin Pierson

Print Page | Close Window