rockford bass knob for 2 amps

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89154
Printed Date: April 27, 2024 at 12:02 PM

Topic: rockford bass knob for 2 amps

Posted By: carstereonewb
Subject: rockford bass knob for 2 amps
Date Posted: January 18, 2007 at 11:25 AM

i already have a power 1000 a2 and am considering buying another one but i don't want to have seperate bass knobs for like left and right sub so i am wondering if it is possible to dual splice it so that both amps are controlled by the same knob. (this would also be helpfull because i just lost the last half of the cord for my old one (started cutting a lot of wires and the phone cord tip got lost and stereo shop says i can't rewire it))

thanks in advance for help.

-------------
If the cars not shaking the radio's to quiet

Replies:

Posted By: coppellstereo
Date Posted: January 18, 2007 at 11:42 AM

as far as i know, you cant use only one knob with rockford amps

-------------

Posted By: cntrylvr79
Date Posted: January 18, 2007 at 10:16 PM

Yeah 1 knob per amp. Tried using splitters and splicing with display amps with very not so good results. As far as repairing the cable goesit is possible. does it have a phone cord jack on the end or an ethernet cable jack? (yeah I don't remember the exact names/numbers for the ends. Please don't chastize me)

-------------
Cause I'm So white and nerdy...
First Class Certi-fried installer

Posted By: carstereonewb
Date Posted: January 19, 2007 at 12:59 AM

yea i can never remember either much easier just to day it's a phone cord thanks for help

-------------
If the cars not shaking the radio's to quiet