2005 Chrysler Pacifica Infinity amp Bypas
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89201
Printed Date: May 31, 2024 at 9:19 AM
Topic: 2005 Chrysler Pacifica Infinity amp Bypas
Posted By: bar61303
Subject: 2005 Chrysler Pacifica Infinity amp Bypas
Date Posted: January 19, 2007 at 7:49 AM
Hi there. I am wanting to perform an amp bypass on a 2005 Chrysler Pacifica Infinity stock amp. I have located the amp thanks to this forum but I now need the color codes for which wire is which in order to perform the bypass. I want to simply cut the input wires that I need to and connect them to the output wires that I need to and thus bypass the amp. My head unit will provide the amp function. Any help would be greatly appreciated.
Replies:
Posted By: Big Dog
Date Posted: January 19, 2007 at 8:40 AM
I have uploaded this hoping it will help. Have a look: Chrysler Pacifica Radio Wiring with Amp and Changer------------- Prepare your future. It wasn't the lack of stones that killed the stone age.
Posted By: bar61303
Date Posted: January 19, 2007 at 11:29 PM
Thanks man! It worked and bypass is completed. It was amazingly easy thanks to your help. Now my new HU is installed and so is my Car Computer with 7inch touchscreen. Woohoo!
Posted By: swwaltw
Date Posted: January 28, 2007 at 5:39 AM
Will this be the same on a 2006 Pacifica I am haveing the same problem. And where is the amp.
Posted By: bar61303
Date Posted: January 30, 2007 at 11:17 PM
The AMP is located in the back under the storage bin thing towards the right. Open the back Hatch and lift up the little storage door on the floor (where the jack is located). You will need a socket wrench to remove the screws holding down the plastic liner in the storage compartment. I think there are about 4 of them. lift out the plastic liner for the storage bin and you should find the silver amp on the right side. It is screwed down with about 3 screws. At least this is where it is located in the 2005 Pacifica. If you are still confused then reply and I will post pictures.
Posted By: Big Dog
Date Posted: January 31, 2007 at 7:54 AM
And, this, folks, is why this site rocks! Share the wealth brothers, share the wealth!
-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.
Posted By: rwentworth
Date Posted: February 18, 2007 at 4:13 PM
I just bought my 2005 chrysler pacifica touring edition... i dont beleive that i have the amp, or the factory sub. I was wondering if there is a bracket, or enclosure that fits on the passenger side in the rear of the car(i think its the factory location for housing one) and if anyone knows where to get it at? and what size of sub can fit there... i really hate to fiberglass an enclosure.... also... if i need to add the aftermarket amp... where should i tap into to add my impedance adapter(line level controller)? any help is appriciated. Thanks!!!
-------------
Rob
|