Reverse mount speakers
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89319
Printed Date: September 11, 2025 at 4:28 PM
Topic: Reverse mount speakers
Posted By: shrug53
Subject: Reverse mount speakers
Date Posted: January 21, 2007 at 3:32 PM
I have a pair of 12" subs that I would like to reverse mount (so the backs show).
My question is this: How do I wire it so that it does not look just stuck on, and how do I pass it through the box without just clamping the speaker on top of it?
Thanks.
Replies:
Posted By: cloak559
Date Posted: January 21, 2007 at 4:38 PM
you could drill a set of holes for each voice coil and just run your wires into the box and out through a single hole or terminal cup on the other side...Just seal the wire holes with some silicone on the inside of the box...
-------------
'89 Mercedes-Benz 300E
Pioneer DEH-5900UB
(2)RE Audio SX 10"s
(1)US Amps MD3D
3ft^3 @ 37Hz
Blowing up in a car accident doesnt worry me, as long as I'm putting out some major dB's when I die...
Posted By: shrug53
Date Posted: January 22, 2007 at 9:10 AM
I know I have seen reverse mounted speakers, but I can not seem to find any photos. Can anyone point me towards some?
|