setup, 4 subs, components
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89447
Printed Date: May 10, 2024 at 6:20 AM
Topic: setup, 4 subs, components
Posted By: spahkz
Subject: setup, 4 subs, components
Date Posted: January 23, 2007 at 9:10 PM
ok, some of you might think this is a noob question, well it is. i want to wire in 4 subs, with component speakers in the front.. i was just wondering if i should run the 4 subs off 2 amps, with a 4 gauge power kit comming from the battery into a power distributor. but my main question is, how am i suppose to hook up the components? if some one could please email me at spahkz@hotmail.com it will be greatly appreciated. and any tips will be welcomed.
Replies:
Posted By: stevdart
Date Posted: January 23, 2007 at 9:50 PM
Answers are best made in this forum. That way, all readers can benefit. Post again with make and model number of your subs. It is only then that someone can help you determine power requirements. As for hooking up the components, what didn't you understand in the owner's manual that came with them? I know sometimes those manuals can be hard to understand. There again, make and model number. ------------- Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
Posted By: coppellstereo
Date Posted: January 23, 2007 at 10:32 PM
you wont be able to use the same amp for both subwoofers and components
-------------
Posted By: throwback2332
Date Posted: January 25, 2007 at 1:48 AM
Give details, amps ratings and channels/mono? Speaker size, RMS rating, 3 subs will be more amp friendly than 4.
-------------
If it's not custom, then it's not you.
|