Print Page | Close Window

Powerbass anyone?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89571
Printed Date: May 04, 2024 at 3:19 PM


Topic: Powerbass anyone?

Posted By: 05z71crew
Subject: Powerbass anyone?
Date Posted: January 26, 2007 at 12:46 AM

OK I have been reading alot of posts about what brand is better. I would like to get everyone's opinion on Powerbass and American Bass. I currently have 2 entry level 12's from Powerbass (the s-12) and I am quite impressed by their performance. I also have an American Bass SQ540 Amp that is a champ!

-------------
lil nicky
06 Elantra (No more z71)
2 12" powerbass subs; 6x9's and 5 1/4's
Kenwood KAC-9152D
American bass SQ540



Replies:

Posted By: cloak559
Date Posted: January 26, 2007 at 3:20 AM
You should really look into another amp, you are severely underpowering those woofers. Your amp is rated at 200wrms and you are probably only seeing around 180 true watts. Which means you are giving 90wrms to each 300wrms speaker. They will run fine as long as your gains are set correctly, but if you want to get the full potential out of those speakers I would look into a single channel amplifier that puts out around 600wrms @ 1-ohm...You will definately be happy you did...

-------------
'89 Mercedes-Benz 300E
Pioneer DEH-5900UB
(2)RE Audio SX 10"s
(1)US Amps MD3D
3ft^3 @ 37Hz

Blowing up in a car accident doesnt worry me, as long as I'm putting out some major dB's when I die...




Posted By: 05z71crew
Date Posted: January 26, 2007 at 9:52 AM
I did that I have a Kenwood KAC 9152D now but IMO the American Bass is a much better quality. My Kenwood is "supposedly" putting out 900 RMS but it turns off every twenty minutes. With the American Bass amp I could turn everything up and leave it thereand that amp would pound away...

-------------
lil nicky
06 Elantra (No more z71)
2 12" powerbass subs; 6x9's and 5 1/4's
Kenwood KAC-9152D
American bass SQ540




Posted By: xtremej
Date Posted: January 26, 2007 at 4:47 PM

I sell powerbass, been impressed so far. Very tough durable equipment and pricing is good. I have not done any of there component sets yet.  Are your 12's dvc's? If so look into using a 600.2, this is our most popular combo.



-------------




Posted By: KarTuneMan
Date Posted: January 26, 2007 at 5:37 PM
xtremej wrote:

I sell powerbass, been impressed so far. Very tough durable equipment and pricing is good. I have not done any of there component sets yet.  Are your 12's dvc's? If so look into using a 600.2, this is our most popular combo.


Yep....great bang for buck.....and profitable too!



-------------




Posted By: 05z71crew
Date Posted: January 26, 2007 at 6:13 PM
My subs are SVC so I could run a two ohm load (shoulda opted for the other VC in hindsight tho)

-------------
lil nicky
06 Elantra (No more z71)
2 12" powerbass subs; 6x9's and 5 1/4's
Kenwood KAC-9152D
American bass SQ540




Posted By: cloak559
Date Posted: January 26, 2007 at 11:40 PM
Honestly, those Kenwood mono blocks are little monsters. Ive had about 5 of them and never had a problem with any of them. The 9152's do get a little warm running at 1ohm, but they DO put out there rated power. I've benched both the 9102 and the 9152...you cant beat those amps for the price...

-------------
'89 Mercedes-Benz 300E
Pioneer DEH-5900UB
(2)RE Audio SX 10"s
(1)US Amps MD3D
3ft^3 @ 37Hz

Blowing up in a car accident doesnt worry me, as long as I'm putting out some major dB's when I die...




Posted By: 05z71crew
Date Posted: January 27, 2007 at 12:15 AM
Then I think there is something wrong with mine. If the amp gets worked at all it quits every time.  

-------------
lil nicky
06 Elantra (No more z71)
2 12" powerbass subs; 6x9's and 5 1/4's
Kenwood KAC-9152D
American bass SQ540




Posted By: DYohn
Date Posted: January 27, 2007 at 11:36 AM
You have two threads going with the same issue.  This one is closed.

-------------
Support the12volt.com




Posted By: DYohn
Date Posted: January 27, 2007 at 11:36 AM
You have two threads going with the same issue.  This one is closed.

-------------
Support the12volt.com





Print Page | Close Window