2006 jeep commander

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=89701
Printed Date: May 13, 2025 at 8:27 AM

Topic: 2006 jeep commander

Posted By: my2003r1
Subject: 2006 jeep commander
Date Posted: January 28, 2007 at 1:37 PM

i want install my new head unit. I have the factory boston acoustic system with amp and factory dvd. I bought the wiring harness and bezel from crutchfield. After taking out the radio I noticed there was another plug. The wiring harness does not work with this plug. Do they make another harness for that one. It will not work without that I do not think. No sound came out when I tried. I just want a solution if possible.

Dave

Replies:

Posted By: Velocity Motors
Date Posted: January 29, 2007 at 10:48 AM

We use the PAC #C2R-CHY for the Commanders and it works great. The system uses a CANBUS type connection to the speakers so you will have limited control of fade on the aftermarket unit. What harness did you end up using from Crutchfield? The C2R-CHY also give you hand brake, reverse, VSS & also switch ignition source for the aftermarket radio.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window