my amp cut out on me

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90112
Printed Date: May 10, 2025 at 8:09 PM

Topic: my amp cut out on me

Posted By: joeydada
Subject: my amp cut out on me
Date Posted: February 05, 2007 at 6:56 PM

First off -
My sub amp shutdown on me yesterday after work. Checked outputs on HU and they operating correctly. Metered my ground, battery, and remote connections.....all operating correctly.

I am running a RF punch 125.2(2 channel 75watt rms per channel/250 rms bridged). I have my amp bolted down to my box. I never noticed before, but there is no external fuse on this amp that i can see. Is there one inside amp case? under?
My speaker load is a 4ohm 150 rms max, so the amp can easily handle this. I know these amps have x-cards in them. Could this have blown a component possibly? is this common?
Just lookin for a lil input before i start un-bolting everything tomorrow p.s this amp never runs hot and showed know signs of malfunction

thnx

-------------
2006 xlt ford ranger

Replies:

Posted By: DYohn
Date Posted: February 05, 2007 at 7:00 PM

Did you change anything before it quit working? How long have you had the amp and was it working fine before? Equipment does break and wear out, you know.

-------------
Support the12volt.com

Posted By: joeydada
Date Posted: February 05, 2007 at 7:02 PM

ive o had for 2 years, but only used 3 months - it is probably like 4 years old

The led light is on and operating on amp aswell

-------------
2006 xlt ford ranger

Posted By: joeydada
Date Posted: February 05, 2007 at 7:03 PM

joeydada wrote:

ive o had for 2 years, but only used 3 months - it is probably like 4 years old
The led light is on and operating on amp aswell

didnt change anything either

-------------
2006 xlt ford ranger