Print Page | Close Window

bazooka rsa150 2hc amplifier

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90367
Printed Date: May 03, 2024 at 2:37 AM


Topic: bazooka rsa150 2hc amplifier

Posted By: samuelsteven
Subject: bazooka rsa150 2hc amplifier
Date Posted: February 12, 2007 at 1:29 AM

I just picked up a Bazooka RSA150 2HC amplifier. It says its 1 ohm stable, but does anyone know the actual wattage? Will it push out more power at 1 or 2 ohms? Im trying to puch 2 memphis M1 15"s. There dual 4 ohms.




Replies:

Posted By: outtaluck72
Date Posted: February 12, 2007 at 12:31 PM
I've got 2 running at 2 ohms mono running 4 Bazooka RX-T2 subs and doing fine, but I feel they are not putting the power out like they should.  Bazooka says 1000 watts at 1 ohm I believe, but that would be at best. at 2 ohms the amps get hot so 1 ohm would really get them hot.




Posted By: aznboi3644
Date Posted: February 12, 2007 at 4:23 PM
You can bridge it at 4 ohms and get 250 watts per sub if the amp puts out rated power.

Or wire em 2 ohm stereo...either way same output.

That amp cannot handle a 1 ohm MONO load





Print Page | Close Window