Print Page | Close Window

kenwood ddx8017 troubleshooting

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90577
Printed Date: May 10, 2025 at 4:47 AM


Topic: kenwood ddx8017 troubleshooting

Posted By: justodd
Subject: kenwood ddx8017 troubleshooting
Date Posted: February 17, 2007 at 12:32 PM

I put the ddx 8017 in my 03 Denali, and it worked fine for a couple of months.  This morning when I turned on my truck, there was no sound coming out of the speakers.  I checked my connections and my settings and all are copesetic, I also pressed the reset button, and no dice.  Please help.

thanks,

todd




Replies:

Posted By: DYohn
Date Posted: February 17, 2007 at 2:34 PM
Does it power up?  Are you using an external amp?

-------------
Support the12volt.com



Posted By: justodd
Date Posted: February 17, 2007 at 3:02 PM

It powers up and works fine; except no sound.  No external amp.  I am using the peripheral interface and the factory bose system.  It worked fine until today, and then it just stopped.

thanks




Posted By: soultinter
Date Posted: February 18, 2007 at 2:24 PM
maybe the factory bose amp took a crap? try connecting a regular speaker directly to the ddx speaker outputs, if the is output on them, then continue down the line testing for output.



Posted By: justodd
Date Posted: February 18, 2007 at 4:01 PM

I know that the factory bose didn't die because, I hooked up the factory radio because I didn't have time to mess around with it yesterday. 

Thanks,

todd


Print Page | Close Window