planet audio sub parameters?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90602
Printed Date: July 12, 2025 at 10:58 AM
Topic: planet audio sub parameters?
Posted By: munchichee
Subject: planet audio sub parameters?
Date Posted: February 17, 2007 at 10:36 PM
I was designing a simple ported enclosure for a single Planet Audio BB12DVC to install in a '97 civic hatchback and decided to run some numbers to come up with a good port design. BUT...The joke of a spec sheet that came with this subwooofer seemed to leave out parameters like Qes, Qms, Rms, etc. I'm using Bassbox Pro and the minmum parametrs needed to run an analsis are Fs, Qms, Vas, Sd, Qes and Re.
Besides spending pointless hours on the phone with support, How can i get at least the Qes and Qms?
Also it suggests 1.5 cu.ft for a ported enclosure. I was thinking a little bigger though.
Replies:
Posted By: DYohn
Date Posted: February 18, 2007 at 9:39 AM
Everything you need is HERE. Planet Audio's technical support web site. ------------- Support the12volt.com
|