alpine pdx 1.1000
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=90643
Printed Date: May 10, 2024 at 10:56 AM
Topic: alpine pdx 1.1000
Posted By: mikejc
Subject: alpine pdx 1.1000
Date Posted: February 19, 2007 at 6:43 AM
I bought an PDX 1.1000 amp on the weekend, hooked it all up and nothing. You can feel the sub move a litttle bit but not what it should be. My equipment ; IVA-D100, MRP-F450, SWR-1242, Type R 6 1/2 front and Back, 1.0 Farad Cap and PDX 1.1000. Last weekend my old amp blew all its fuses it was a pioneer 1000 watt, that is why i bought the new Alpine amp. Checked all of my in line fuses, main power fuse and distribution fuses, replaced them all still the same problem. The amp powers up and everything but no sound! My other amp for speakers works fine its on the same distribution block and same remote turn on. I also tried a different sub it did the same thing. Oh I also tried the rca's from the MRP-F450 to the PDX input, same problem. Any ideas?
Replies:
Posted By: haemphyst
Date Posted: February 19, 2007 at 8:38 AM
1: What head unit are you using?
2: How is your gain set?
-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
Posted By: mikejc
Date Posted: February 19, 2007 at 8:41 AM
My head unit is a Alpine IVA-D100 DVD, gain is set at nom.
Posted By: aznboi3644
Date Posted: February 19, 2007 at 12:42 PM
gain set at nom????
Posted By: mikejc
Date Posted: February 22, 2007 at 2:49 PM
Found the problem, fuse was blown, didn't look blown, but it was!
|