Here's my problem. I don't have the power harness that powers it up because the Cenet cable alone evidently doesn't give it power. But I've gone through 2 different used tuners and neither came with that power harness. All I really need is the layout to the connector so I can add it myself because nobody offers one for sale and there is almost NOTHING about this tuner online. The model # is SIR-CL1
Can anybody help me by taking a pic of that harness, finding a pic of it, or at least the layout? I've looked everywhere I can think of. Thanks.
according to the manual
https://www.clarion.com/us/en/MungoBlobs/731/164/SIR-CL1.pdf
that harness is only used with the optional DSC920S remote commander, if you are just plugging the tuner into your clarion radio, you shouldnt need it. check to make sure that the switch on the bottom of the unit is set to CeNet.
here is the manual for the DSC920S, i couldnt find anything in there, but i might have missed something https://www.clarion.com/us/en/MungoBlobs/148/231/DSC920S.pdf
-------------
there are 2 yellow wires at the main radio harness, make sure they are both hook up to 12volts at all times one powers the radio the other powers the c-net circuit trough the cable
-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.
Hey Guys...
Been lurking around these boards for a while now and finally feel that I can contribute something worthwhile... I bought a Clarion DXZ 645 to replace a broken dxz615. The problem was that the cenet cable apparently wasn't supplying power to my 12-disc changer. After checking around for a while I realized that there was a reference to 2 yellow (constant) power wires on the 16-pin harness, but only ONE is factory-connected. I made a power connection for the free pin on the harness and bingo! So try a constant 12 volt to the free pin on the power harness and see if this works.
didn't you read my prevoius post??
Rhoan] wrote:
/P>Hey Guys...
Been lurking around these boards for a while now and finally feel that I can contribute something worthwhile... I bought a Clarion DXZ 645 to replace a broken dxz615. The problem was that the cenet cable apparently wasn't supplying power to my 12-disc changer. After checking around for a while I realized that there was a reference to 2 yellow (constant) power wires on the 16-pin harness, but only ONE is factory-connected. I made a power connection for the free pin on the harness and bingo! So try a constant 12 volt to the free pin on the power harness and see if this works.
-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.
Bnluis... I read your post, but what I was getting at in my post is the fact that my (genuine) Clarion wire harness did NOT come with the two yellow wires mentioned: only one yellow wire is on the harness. What we have is a vacant slot on the harness. He may have the same problem I was having, in that, he may be looking for 2 yellow wires. I've had Clarion head units since 2001 and none of the harnesses has two yellow wires. Rhoan.
you are right , clarion ommitted certain wires depending on the model of the radio.
-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.