ported box for 2 10" RF Punch HX2 subs
Printed From: the12volt.comForum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91103
Printed Date: May 06, 2025 at 11:27 PM
Topic: ported box for 2 10" RF Punch HX2 subs
Posted By: FZRaven
Subject: ported box for 2 10" RF Punch HX2 subs
Date Posted: February 28, 2007 at 3:33 AM
Ok so I'm looking to build a ported box for 2 10" RF Punch HX2 subs. I used a program to figure out what all the details, this is what i came up with.
Vb 3.89 Cu/Ft
F3 22.51
i can't see where it gives me port area, but it i have Height, Width and Length
Height 13.5"
Width 4"
Length 43.31"
I have a JBL 600W Mono amp i'm going to be using, i figured that in also. The box is supposed to be high output while still keeping a little bit of SQ.
Here is a picture of the box modeled.
That mesurment thats hard to see is 1' 9 13/16"
Vb 3.89 Cu/Ft
F3 22.51
i can't see where it gives me port area, but it i have Height, Width and Length
Height 13.5"
Width 4"
Length 43.31"
I have a JBL 600W Mono amp i'm going to be using, i figured that in also. The box is supposed to be high output while still keeping a little bit of SQ.
Here is a picture of the box modeled.
That mesurment thats hard to see is 1' 9 13/16"
Replies:
Posted By: FZRaven
Date Posted: February 28, 2007 at 3:39 AM