Print Page | Close Window

eclipse sw8102 t/s parameters?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=91104
Printed Date: May 03, 2025 at 3:08 PM


Topic: eclipse sw8102 t/s parameters?

Posted By: No1stunna
Subject: eclipse sw8102 t/s parameters?
Date Posted: February 28, 2007 at 4:47 AM

Does anyone have the t/s parameters for an eclipse sw8102? I've tried to contact fujitsu, but I get no response... I've also searched the internet pretty thoroughly to no avail. Any help is greatly appreciated, thank you in advance!!



Replies:

Posted By: No1stunna
Date Posted: February 28, 2007 at 5:11 AM
Sorry, I forgot to mention the "why". I need a box for 2 8102 dvc, I have an old spec sheet for the 88000 series that I've sort of been using as a ballpark starting point. Basically I need to know how these subs perform best (sealed. ported, etc) do I need a double thick face for the box? they will be powered with a crossfire vr1000 in a 95 civic. thanks again.


Print Page | Close Window