wiring tweeters for alpine component set

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92042
Printed Date: May 05, 2024 at 6:11 AM

Topic: wiring tweeters for alpine component set

Posted By: j_darling2007
Subject: wiring tweeters for alpine component set
Date Posted: March 23, 2007 at 5:33 PM

I need to know which wire is the positive wire for my Alpine SPR-17LS Component Set. There are 2 wires, one is clear and one is clear with a black trace. I assumed the Black trace is negative, but my father (whose is an ASE certified tech) told me that the traced wire is usually positive. I checked Alpine's website (the tech section sucks) to no avail. Does anyone know the positive wire.

Thanks for the help

Jacob

-------------
There are 3 kinds of people in the world, those who can count and those who can't

Replies:

Posted By: dwarren
Date Posted: March 23, 2007 at 5:36 PM

I' m going with black stripe as negative.

Either way you won't hurt any thing. Some times flipping phase can help with imaging, particularly if you only flip the phase on one tweeter.

-------------

Posted By: dman007
Date Posted: March 31, 2007 at 1:10 AM

As long as you designate each wire the same way for every speaker, you will be ok.

Example if you use the black trace as the neg for the tweeter, do the same for the woofer and input. This will ensure that all your speakers are in phase.

-------------
DTS Performance
St Petersburg, FL