removing cd changer w/rf adapter

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92332
Printed Date: May 05, 2024 at 1:56 PM

Topic: removing cd changer w/rf adapter

Posted By: dazed
Subject: removing cd changer w/rf adapter
Date Posted: March 31, 2007 at 11:39 AM

I've removed everything but the RF adapter from my MX6 and need to pull the RF adapter. I want the antenna to still go be engaged/disengaged when I turn radio on/off. It is located in the trunk with the antenna motor. Any quick and easy suggestons?

Replies:

Posted By: custom audio ny
Date Posted: March 31, 2007 at 1:12 PM

Do you mean you want the antenna to still go up and down with the radio power after you remove the RF adaptor for the cd changer?

If so you have no worries. The Rf adaptor uses the antenna coax cable but has nothing to do with the remote wire that controls the relay for the power antenna motor.

-------------
Custom Audio
Lynbrook NY

ASE/MECP master certified

Posted By: dazed
Date Posted: April 01, 2007 at 3:39 PM

Exactly. I haven't done anything but remove the box and the remote sensor, RF adapter is in trunk still wired up. Thanks for replying.

Posted By: dazed
Date Posted: April 01, 2007 at 3:41 PM

Thanks ny, I'll pull it.

Print Page | Close Window