wiring dual 4 ohm audiobahn 12's

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92365
Printed Date: May 14, 2025 at 8:13 PM

Topic: wiring dual 4 ohm audiobahn 12's

Posted By: juggernaut_122
Subject: wiring dual 4 ohm audiobahn 12's
Date Posted: April 01, 2007 at 1:52 AM

I have 2 DVC dual 4 ohm Audiobahn 12's 400 rms apiece

and a Volfenhag 2000 watt amp 2 channel 2 Ohm Stereo stable and 4 Ohm bridged

I have been looking and looking for a correct wiring way for this. Can i get a right way to correctly wire these with getting some bump out of them?. Please i dont wanna hear about how bad audiobahn and volfenhag is. I would just like a little help. :) Thanks for any info as it is much appreciated.

Dan

Replies:

Posted By: stereo_guy
Date Posted: April 20, 2007 at 3:05 AM

sounds like you have the same speakers i have. Audiobahn AW1251T. and if i guess correctly the volfenhag zx8400. if you wire the subs to 2 ohms and give them each their own channel you will surely blow the crap out of them. try this link from audiobahn(https://www.audiobahn.com/Audiobahn06/images/tech/wiring/Series_Parallel_dual_4_ohm.pdf)

and for your speakers sake keep the gain down on the amp. at 4 ohms mono that amp puts out 2000 watts.

-------------
bass is meant to be felt, not heard

Posted By: Velocity Motors
Date Posted: April 20, 2007 at 8:26 AM

Your only choice is this configuration . If you would have bought SVC then you would have been able to wire it up in 2 ohm load.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window