turn off pop w/ Onstar interface

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9253
Printed Date: May 28, 2024 at 6:31 PM

Topic: turn off pop w/ Onstar interface

Posted By: mrdonedeal
Subject: turn off pop w/ Onstar interface
Date Posted: February 08, 2003 at 11:59 PM

I used a Soundgate STARMOD DV2 to interface with the onstar system in a 02 Tahoe. An external speaker was used for playback. The problem is that about 20 seconds after the ignition is turned off, there is a pop that comes through the external speaker. Has anyone ran into this problem or know how to remedy it?

Thanks in advance.

-------------
Mr. Donedeal

Replies:

Posted By: slobert
Date Posted: February 09, 2003 at 11:39 AM

i've heard of people putting a resistor on the amp turn on, don't know if it was for the onstar speaker though

Posted By: mrdonedeal
Date Posted: February 10, 2003 at 12:26 AM

Thanks for the reply, slobert, it's worth a shot.

-------------
Mr. Donedeal

Print Page | Close Window