multiple amp wiring

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92595
Printed Date: May 10, 2025 at 3:21 PM

Topic: multiple amp wiring

Posted By: cbvampyre
Subject: multiple amp wiring
Date Posted: April 06, 2007 at 4:11 AM

I tried to install a dual amp setup tonight but ran into some problems. My bass stopped hitting as hard and vocals were coming through my subs as well as through my component speakers. I double checked my wiring and it looked like it was hooked up right, but apparently I was wrong. I'm using a 1900 watt Boss amp for 2 Audiobahn 12" subs and a 300 watt Jenson for two 6 1/2" Sony Xplod components for vocals in a 92 Accord. Any help or diagrams would be appreciated.

Replies:

Posted By: coppellstereo
Date Posted: April 06, 2007 at 10:22 AM

make sure your sub amp cross over is set on LPF (Low pass filter)

-------------

Print Page | Close Window