2001 tahoe stereo
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92683
Printed Date: May 02, 2024 at 10:34 PM
Topic: 2001 tahoe stereo
Posted By: nchinca
Subject: 2001 tahoe stereo
Date Posted: April 08, 2007 at 10:00 AM
I am in dire need of help. I am new to this forum and not heavy into installing stereos. My wife has a 2001 Tahoe. I am installing an afetrmarket HU. I plugged in the new HU, and there was no noise. The old stereo had two connectors, the main one and a smaller I think 9 pin or so. Anyway, I have no provision for the smaller one - What do I do with it? If I leave it unplugged on the factory stereo, there is no noise through the speakers, as soon as I plug it in, there is noist. How do I make this work? I am using a Metra 80-1858 adapter. Help me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Replies:
Posted By: burns25
Date Posted: April 08, 2007 at 10:36 AM
The pink wire in the small 9 pin wire should be the remote turn on. So hook up the remote turn on output from the radio you are putting in to that wire and you should be good to go.
Posted By: nchinca
Date Posted: April 08, 2007 at 4:27 PM
thank you so much, then do i just leave the rest of it alone?
Posted By: swerve
Date Posted: April 08, 2007 at 5:21 PM
yup dont do anything to the rest o them, just the pink wire and you will be all set
-------------
git yer swerve on!
Posted By: nchinca
Date Posted: April 08, 2007 at 9:14 PM
Thanks, you all have been great, and this thing sounds great!
|