amp channels

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92712
Printed Date: May 14, 2025 at 4:54 PM

Topic: amp channels

Posted By: pitoaudiovisual
Subject: amp channels
Date Posted: April 08, 2007 at 10:12 PM

is there any way to tell if the amp channels are blown besides to just connect a speaker to it to see if it works..

-------------
Confidence is the key to any project!!

Replies:

Posted By: DYohn
Date Posted: April 09, 2007 at 10:18 AM

Yes, if you have access to a voltmeter. Disconnect the speakers, play a nice tone, and measure the voltage output from the amp.

-------------
Support the12volt.com

Print Page | Close Window