Print Page | Close Window

sub enclosure for 2 12W0

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9272
Printed Date: August 21, 2025 at 12:02 PM


Topic: sub enclosure for 2 12W0

Posted By: skiflyer45
Subject: sub enclosure for 2 12W0
Date Posted: February 09, 2003 at 10:47 AM

Hi,
I want to build a new box for my 2   12W0, I went to the JL Audio homepage and it said that the box should have a net internal volume of 1.5F^3, the box I'm planning on building would only have a volume of rougly 1.3f^3.

My question is, if it really is important that the volume is 1.5 ???

thanks
---alex---



-------------
skiflyer



Replies:

Posted By: bberman1
Date Posted: February 09, 2003 at 10:57 AM
I assume your talking about a sealed enclosure. If so you will not have any kind of problem using 1.3 cu/ft over 1.5 cu/ft. Also as far as sound goes you will not be able to hear any difference between the two volumes.



Posted By: skiflyer45
Date Posted: February 09, 2003 at 11:02 AM

thank you very much.



-------------
skiflyer



Posted By: bberman1
Date Posted: February 09, 2003 at 11:17 AM
your welcome




Print Page | Close Window