trying to identify an eclipse sub

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93203
Printed Date: May 02, 2024 at 12:48 AM

Topic: trying to identify an eclipse sub

Posted By: 82Firebird
Subject: trying to identify an eclipse sub
Date Posted: April 21, 2007 at 8:11 PM

I bought a 12" Eclipse subwoofer off of my friend. He had the sub in his car for a few years and his brother gave it to him before that. I'm trying to find some specs on it but I'm not too sure which model it is. Here are a few pictures. posted_image

posted_image

Replies:

Posted By: 82Firebird
Date Posted: April 22, 2007 at 10:14 PM

Anything? From what I've read most that *look* like this use 400-500 watts RMS. So I guess I'll just get an amp suitable and see how it goes.

Posted By: aznboi3644
Date Posted: April 22, 2007 at 10:37 PM

I'm not sure...sorry I couldn't help.

I'd feed it prolly around 500 watts rms.

Meter the leads and see what the DCR is to confirm the coil impedances

Posted By: forbidden
Date Posted: April 23, 2007 at 1:23 PM

It is the first generation Eclipse aluminum cone. 88120 IIRC. It was indeed 500w rms and was available as a svc or dvc version.

-------------
Top Secret, I can tell you but then my wife will kill me.

Print Page | Close Window