flush 52mm guage 95 civic?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93634
Printed Date: May 09, 2025 at 3:40 PM

Topic: flush 52mm guage 95 civic?

Posted By: lilspeedy626
Subject: flush 52mm guage 95 civic?
Date Posted: May 04, 2007 at 11:24 PM

Does anyone have DYI flush 52mm guage on a 95 civic?

Replies:

Posted By: aznboi3644
Date Posted: May 05, 2007 at 2:36 AM

what are you talking about????

power wire or what?? flush???

Posted By: haemphyst
Date Posted: May 05, 2007 at 12:55 PM

lilspeedy626 wrote:

Does anyone have DYI flush 52mm guage on a 95 civic?

hu, wha...? Please elaborate... I think nobody here will understand at ALL what you are asking.

-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

Posted By: auex
Date Posted: May 05, 2007 at 2:18 PM

Where do you want to flush it? I think he means an instrument guage like a tach or boost guage.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Posted By: austincustoms
Date Posted: May 06, 2007 at 1:58 PM

Where are you looking to flush it? into the factory gauge pod? In a custom pod? The best I can tell you without further info would be to make one ring from 1/2" MDF with the inside diameter of the gauge face, and an outside diameter about 3/4" wider. Make another ring with the same outside diameter, and the inside the mounting diameter of the gauge. glue or staple the two together, and you've got a flush mounting ring that you can use for almost any installation.

Print Page | Close Window