ohms, pair of 4 ohm svc 12’’

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93690
Printed Date: May 05, 2024 at 7:37 AM

Topic: ohms, pair of 4 ohm svc 12’’

Posted By: gavin_2.6
Subject: ohms, pair of 4 ohm svc 12’’
Date Posted: May 07, 2007 at 11:32 AM

Hi all,

Quick question if you dont mind.

I have just bought a pair on SVC 12 inch subs that are 4 Ohm. I also have an amp that is capable of running 4 Ohms in bridged mode or 2 Ohms in stereo.

I will be getting another one of the same amps next payday so will have 1 amp per sub but for now how can i wire the 2 subs to run from the 1 amp.

All info would be great.

Thanks

Gav

Replies:

Posted By: duct tape
Date Posted: May 07, 2007 at 12:20 PM

for now, just run one sub to the left channel, and the other to the right channel. this wont yield the most power from the amp, but will be a safe load for the amp.

when you get your 2nd amp, then bridge one sub on each amp.

-------------

Print Page | Close Window