crossover

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93764
Printed Date: April 17, 2024 at 8:21 PM

Topic: crossover

Posted By: pitoaudiovisual
Subject: crossover
Date Posted: May 09, 2007 at 5:06 PM

when wiring a crossover what size gauge wire should i use. can i use regular wire or should i use the same gauge i use for the amp which is 0 gauge..

-------------
Confidence is the key to any project!!

Replies:

Posted By: zhalverson
Date Posted: May 09, 2007 at 5:11 PM

Use regular speaker wire to your crossover. Don't think 0 gauge is going to fit anyways. posted_image

Posted By: pitoaudiovisual
Date Posted: May 09, 2007 at 10:08 PM

yeah i kno just wanted to make sure i wasnt cheating power to it thanks..

-------------
Confidence is the key to any project!!

Posted By: jmelton86
Date Posted: May 10, 2007 at 12:41 AM

Active? What size fuse does it take?

-------------
2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001

Posted By: zhalverson
Date Posted: May 10, 2007 at 2:53 PM

Yeah, I guess i was assuming passive for some reason but most active crossovers aren't going to need very big power and ground wires at all anyways.

Print Page | Close Window