Print Page | Close Window

what amp to use for a p3sd412

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=93802
Printed Date: May 02, 2024 at 7:22 PM

Topic: what amp to use for a p3sd412

Posted By: jonchos
Subject: what amp to use for a p3sd412
Date Posted: May 11, 2007 at 12:00 AM

I am purchasing this driver next week and I need amp for it.

https://www.rockfordfosgate.com/products/product_details.asp?cat_id=4&series_id=31&family_id=55&item_id=108285&locale=en_US&p_status=

I have a rockford fosgate p5002 and it puts 500 x 1 @ 4 ohms but I don't think I can use this since the load of the driver is a 2ohm.

So I was looking at the rockford p325.1 Power at 2 Ohms (Watts x Channels) 325 x 1
Would this one be to little for the driver?

I am keeping everything rockford so it must be rockford. And I have only space for 1 driver so. What would you recomend?

Replies:

Posted By: jonchos
Date Posted: May 11, 2007 at 10:37 PM

I am looking at the rockford p600.1bd or the alpine mrp-m650

Print Page | Close Window