Print Page | Close Window

setting gains on amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94176
Printed Date: May 04, 2024 at 12:59 PM


Topic: setting gains on amp

Posted By: rboutin2
Subject: setting gains on amp
Date Posted: May 23, 2007 at 6:21 AM

I have 2 12" Alpine type r's. in a custom ported box tuned to 30 hz. It is powered by 1 MRD M1005 amp, pushing 1000 rms into 2 ohms. I was wondering how to set the gains to get the most power from my amp. The manual for the amp says to match the gain to the voltage of the preout on the deck. I have an Alpine CDA-9847 deck. It has 2 volt preouts. So should i set the gain on the amp to 2 volts? Thanks in advance for any and all help!

-------------
Disturbin' Tha Peace



Replies:

Posted By: wotugot4me
Date Posted: May 23, 2007 at 7:52 AM
https://www.the12volt.com/installbay/forum_posts.asp?tid=85479&KW=boulderguy


Print Page | Close Window