x over

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94309
Printed Date: May 09, 2025 at 8:40 AM

Topic: x over

Posted By: tomknotts
Subject: x over
Date Posted: May 28, 2007 at 12:37 PM

Hi Guys

I have a Alpine CDA-9855 HU

-a MRV-F545 125W x 4 Amp

My amp is running Alpine type R components and type R 6x 9

I listen to mainly rock and rap

My question is and ive seached alot but havent been able to find anything

what should i set my X-over on my deck to and on my amp

Also the deck has a 7 band -eq what would be the best settings for that

thank you

Replies:

Posted By: duct tape
Date Posted: May 28, 2007 at 4:06 PM

it usually comes down to personal preference, however...

if you are not running a subwoofer, i would set the x-over for the components to high pass at about 60-80 hz. and turn off the xover for the 6x9s.

if you have a subwoofer, then i would probably set the high pass filter for the 6x9s as well.

as far as the eq goes, nobody can tell you how to set it without sitting inside the car. it comes down to personal preference and how you want it to sound.

-------------

Print Page | Close Window