I own a 1998 Jeep Cherokee. I have an Audiobahn 4002V that is running to 2 pairs of Audiobahn ABC525Ts. The speakers are blown and the outputs are blown which has caused the amp to go into protection mode. I also have an Audiobahn 8002V running to a pair of Audiobahn AWC12T subs. I want to unhook the amp that is malfunctioning. I'm good with my hands but a novice at this installation stuff. I know that you have to remove the fuse. How can I tell which fuse goes to which amp and can anyone offer some simple instructions on uninstalling the amp?
Dangerous to give that advice without seeing the car! I would take it to the shop that installed it to have it removed. They may not honor your warranty if you mess with it yourself. Or, if you think you can do it, try removing one fuse and turning over the key. If your subs kick on; you got the right one. If not, put it back, it's the other one. Make shure you well terminate (cut and wrap) each wire you remove from the faulty amp BEFORE you turn the key back over. You can't learn till you try.
Good luck.
-------------
David Fancher
USACi World Finals 2006
4th Place SQ PRO 601+