Print Page | Close Window

audio, 99 dogde intrepid

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94378
Printed Date: May 10, 2025 at 2:54 AM


Topic: audio, 99 dogde intrepid

Posted By: juanvargas
Subject: audio, 99 dogde intrepid
Date Posted: May 30, 2007 at 12:02 PM

My situation is as follows, i have a 99 dogde intrepid and im trying to install a kenwood cd receiver,once installed only the tuner is able to be heard.   If i go into cd mode no sound come out.   I tried two different receivers and both do the same thing.  



-------------
juanvargas



Replies:

Posted By: BNLUIS
Date Posted: May 30, 2007 at 12:31 PM
When u connect the kenwood radio use the blue/white wire in the kenwood harness, don't use the blue wire that is the remote antenna wire, it only powers when listening to the radio. The Blue/White wire is th amp turn on wire ite powers whenever the radio is on regardless of wheter you are listening to radio or cd player. If u used a car specific harness make sure to use the BLUE/WHITE WIRE in the Kenwood. I am Assuming you car has an Infinity factory amp system.

-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.


Print Page | Close Window