high pass filter

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94637
Printed Date: July 07, 2025 at 5:26 AM

Topic: high pass filter

Posted By: canthink344
Subject: high pass filter
Date Posted: June 09, 2007 at 1:31 AM

I am curious about where i should set my high pass filter at. I have one 12 inch Kicker L5 and 8 Polk mmc650. The system is in a wake board boat; 4 tower speakers, and 4 cabin speakers. We listen to nearly all rap and rock. I wanna get the most from my speakers without running the risk of blowing them. We do play them at pretty high levels. Any comments would be helpful.

Replies:

Posted By: DYohn
Date Posted: June 09, 2007 at 9:24 AM

Where is the low-pass for the subs set? Use the same frequency for the mains high-pass.

-------------
Support the12volt.com

Posted By: canthink344
Date Posted: June 09, 2007 at 10:57 AM

yeah, i don't know... the low pass filter on the sub doesn't have indications of where its set at... what do people usually run that sub at?

Posted By: DYohn
Date Posted: June 09, 2007 at 12:16 PM

80 to 120 Hz.

-------------
Support the12volt.com

Print Page | Close Window