hifonics 2006d info
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94709
Printed Date: May 14, 2025 at 8:35 PM
Topic: hifonics 2006d info
Posted By: westlos213
Subject: hifonics 2006d info
Date Posted: June 12, 2007 at 1:36 AM
i currently have 2 kicker l7 12'' 4ohm wired paralell in a ported box now i have only the positive and the left negative used and then im running speaker wire from one sub to another as opposed to running wire from the amp to each sub individually,now will this result in a 1ohm load? does this sound right? will i mess something up? the amp is not bridgeable but 1ohm stable......the amp is a Hifonics mono 2006d
Replies:
Posted By: aznboi3644
Date Posted: June 12, 2007 at 1:53 AM
if the coils are still in parallel than yes
Posted By: westlos213
Date Posted: June 12, 2007 at 2:04 AM
so even though the amp is not ''bridgeable'' i can still run it like this?, thanks for the reply
Posted By: aznboi3644
Date Posted: June 12, 2007 at 11:26 AM
yes...as long as all the +'s are wired to each other then to the amps + and all the -'s are wired to each other and then to the amps - than it is still all in parallel
Posted By: westlos213
Date Posted: June 12, 2007 at 6:33 PM
perfect, thanks.. i kinda figured that but i wasnt sure, abother thing on this amp the manual states to wire the subs negative left and positive far right ,shouldnt it be the other way around?
|