2 jl 12w3v3 4 ohm, xtant 604 amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94785
Printed Date: May 04, 2024 at 4:53 PM

Topic: 2 jl 12w3v3 4 ohm, xtant 604 amp

Posted By: ctintd
Subject: 2 jl 12w3v3 4 ohm, xtant 604 amp
Date Posted: June 14, 2007 at 12:12 PM

hey i've got 2 JL 12w3v3 subs at 4 ohms each. I was wondering if an xtant 604 bridged for 2 300 watt channels at 4 ohms would be sufficient to power these things. Would it be better to use a mono amp? also, is it correct that dual voice coils only allows for more configurations, or does that actually allow the subs to perform better? thanks!

Replies:

Posted By: KarTuneMan
Date Posted: June 14, 2007 at 9:06 PM

That x604 will work.....beautifully. Great amp.

-------------

Posted By: ctintd
Date Posted: June 14, 2007 at 9:20 PM

well i appreciate the quick reply! thanks a lot. When do you guys think i should be worried about putting strain on my alternator? I have a 97 Ford explorer XLT. thanks guys

Print Page | Close Window