Print Page | Close Window

check my math, box

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=94809
Printed Date: April 29, 2024 at 3:10 AM


Topic: check my math, box

Posted By: pendulum
Subject: check my math, box
Date Posted: June 15, 2007 at 1:46 AM

ok, I went to Lowes and bought all of my supplies tonight, so box building begins tomorrow after work :) I scored a 7x13 foot piece of nice black carpet for less than $5.00... Much better than that grey felt-y stuff :O anywho, I'm using 3/4 inch MDF, and I'm looking for about 3.25 cu ft after the driver and ports.
Here's my measurements
22Wx22Dx16H - Rectangle - Woofer firing straight up towards rear deck.
13H1x23Wx23Dx16H2 - Wedge - Woofer firing towards front of car.

Ports are 2 4x18 inch ABS pipes. WinISD screenshots below. Thank you very much to everyone, I just want this to be right.


posted_image

posted_image

posted_image

-------------
1999 Toyota Camry
--
Pioneer DEH-P3700MP
Lightning Audio Strike S4.15.VC2
Lightning Audio Strike S4.500.1
Majestic 6.5"



Replies:

Posted By: pendulum
Date Posted: June 15, 2007 at 1:47 AM
posted_image

-------------
1999 Toyota Camry
--
Pioneer DEH-P3700MP
Lightning Audio Strike S4.15.VC2
Lightning Audio Strike S4.500.1
Majestic 6.5"




Posted By: aznboi3644
Date Posted: June 15, 2007 at 1:59 AM
looks nice...what is the input power plotted??

if this is a car I would have the sub firing back and the port firing back...safest way...works the best most of the time





Print Page | Close Window