how to mount a usb connector?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=95348
Printed Date: April 26, 2024 at 4:54 AM
Topic: how to mount a usb connector?
Posted By: sufferrar
Subject: how to mount a usb connector?
Date Posted: July 05, 2007 at 10:12 AM
I have a premier deh-690ub that comes with the USB cable and i need to figure out a way to install it into some part of the dashboard. Is there any way of mounting it without cutting a hole and glueing it up?
Or is there a connector that can be mounted on the dash and then connect to the USB port? I want it to look neat.
-------------
"I'm So Loud It Hertz"
Replies:
Posted By: memfus_boi
Date Posted: July 05, 2007 at 11:33 PM
you can always use velcro! haha but i have the 6900 and i ran my usb to the glove bod so you will not see the cord nor device(mp3 player) hooked up and here's a hint if u don't have a "ipod" the cheapest way out is to get a ortable hard drive that is USB powered and its alot cheaper and larger then purchasing an ipod!
-------------
If I'm to loud, then you're too old!!!
Posted By: audiocableguy
Date Posted: July 07, 2007 at 4:43 PM
https://secure.libertycable.com/ecomm/catalog/cat_page.php?group=458
Item PC-R20
Posted By: 1456wires
Date Posted: July 08, 2007 at 10:56 AM
clarion ccausb. Drill a hole and you are done. We use them a lot
|