crossover settings

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=95713
Printed Date: July 15, 2025 at 2:50 PM

Topic: crossover settings

Posted By: Slammed_Am
Subject: crossover settings
Date Posted: July 18, 2007 at 9:48 AM

I've recently installed a pair of Polk SR 6.5" components in my Honda and I think its the factory angle of the tweeter pod, but I can't really hear the drivers door tweeter as much as I can the passenger side.

I have the x overs set at -3dB and if I move the driver side up to 0 or +1dB It sounds a lot bettr and well centered.

My question is would having 1 xover set at -3 and the other at +1 cause any harm?

Replies:

Posted By: haemphyst
Date Posted: July 18, 2007 at 10:18 AM

No.

-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

Print Page | Close Window