class d mono powering 4 midranges?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96008
Printed Date: May 14, 2025 at 10:52 PM

Topic: class d mono powering 4 midranges?

Posted By: slinky85
Subject: class d mono powering 4 midranges?
Date Posted: July 29, 2007 at 12:40 AM

I have/will have 2 pairs of 4-ohm speakers (4 total). two will be 4" plates, the other pair will be 6.5" round. all are midranges. If I wire them in a series/parallel combo to a "mono" 4ohm load will they work with my old class D mono sub amp? Alpine MRD-M605, 600 W RMS @ 4 ohms. I only ask because I believe this is a sub only amp, and I want to verify. thanks

Replies:

Posted By: DYohn
Date Posted: July 29, 2007 at 1:08 AM

I don't know why you would want to do something like that, but no, your MRD-M605 is a subwoofer amplifier with rated frequency response only from 20 to 200 Hz. It is not designed for use driving midrange speakers.

-------------
Support the12volt.com

Print Page | Close Window