line output converter with factory amp
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96098
Printed Date: July 05, 2025 at 4:44 PM
Topic: line output converter with factory amp
Posted By: BRaVO503
Subject: line output converter with factory amp
Date Posted: August 01, 2007 at 2:09 PM
ok I'm trying to install an amp in a 2004 gmc sierra with a bose system and a factory amp iam confused b/c ive never done a system with a factory amp. I know there are amp bypass kits but i dont know what thats for. I tried hooking up a line output converter after the factory amp but it doesn't sound right(i bought the converter from wallmart so maybe its just cheep)
thanks in advance
Replies:
Posted By: audiomaninc
Date Posted: August 01, 2007 at 2:19 PM
use PAC AOEMGM24. You will be satisfied! This will cost you around $50. Good luck!
-------------
2003 Dodge Neon R/T
Alpine CDA9813, RF T2000.1bd, RF T162S, RFT142C, RF T600.4, RF T215D4
140.7 @ 28Hz
Posted By: 01trublugt
Date Posted: August 02, 2007 at 9:33 AM
here you go, step by step using the above posted converter with pictures. https://www.silveradoss.com/forums/index.php?showtopic=8123
|