07 tacoma dbl cab factory amp

Is it in the back next to the JBL sub? Have a customer that want to replace the sub, and the sub portion of the factory amp. The idea is to simply find the outputs of the amp that power the sub, unhook them (if we can keep the rest of the amp playing) Use the inputs for a peripheral hi to low, and add an Alpine PDX 1.600 He want's the deck to remain factory....of course.

Has anyone done this type of set up? The jobs coming in next Monday!

-------------

the amp is on the pass ide under the rear seat. the set up should work put a sub and pair of focal k2p's in one a couple months ago used seperate amp for sub but used a aftermarket deck


-------------
Steve Sverdahl
Swerksound Auto Electric
Red Deer Alberta

It's not under the seat....either side. That was the first place I looked

-------------

there should be a "trap door" under the pass rear seat the amp is in there

-------------
Steve Sverdahl
Swerksound Auto Electric
Red Deer Alberta

Notes

Amplifier is located near right "C" pillar.

All the way in the back. This truck has no trap door. The seats fold up forward like a full size truck. The cute little JBL sub is behind the pass. side.

Now heres another wild thing!

Left Front +	Red	Line level output
Left Front -	NCA	Common signal ground connecting radio pin R1-10 to amplifier pin R1-6
Right Front +	Green	Line level output
Left Rear +	Black	Line level output
Right Rear +	White	Line level output  How does one use a peripheral SVEN 2 on this?

-------------

the truck i did must have been an extended cab its been a couple months so im not sure


-------------
Steve Sverdahl
Swerksound Auto Electric
Red Deer Alberta

use the sub output wires for your input take them rigt from the fact sub

-------------
Steve Sverdahl
Swerksound Auto Electric
Red Deer Alberta