need insight on how to wire up aux plug

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96303
Printed Date: May 19, 2024 at 6:23 AM

Topic: need insight on how to wire up aux plug

Posted By: chevypas
Subject: need insight on how to wire up aux plug
Date Posted: August 10, 2007 at 10:18 PM

Ok heres the deal,

I bought a panel mount aux input to plug it my avic d2. Im trying to find how to plug it to my 2 rca jacks. There is 2 wires for each rca wire so I have a total of 4 wires. I figures if i use the outer wire on each and put it on the middle hump of the 1/8 audio jack I get the sound but it not loud, I really have to raise the volume. Im not sure if I need to use the other wires or where to put them... I also ge a buzz sound trough the music... If anyone can help me that would be much apreciated.. thanks

Replies:

Posted By: i am an idiot
Date Posted: August 10, 2007 at 10:35 PM

The following info pertains to the male plug that plugs into your jack.

The tip of your cable is the left signal wire. The middle ring is the right signal wire. The ring closest to the cable is the ground. this is where you should connect the 2 outer conductors of your cable

Posted By: chevypas
Date Posted: August 11, 2007 at 10:43 AM

Ok thanks I will try that! I love this forum!!!!

Posted By: Fosgate3
Date Posted: August 11, 2007 at 10:49 AM

it's a crackerjack of a forum, aint it?