3 10w1 4 jl’s
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96392
Printed Date: May 20, 2024 at 4:36 PM
Topic: 3 10w1 4 jl’s
Posted By: oldskool72
Subject: 3 10w1 4 jl’s
Date Posted: August 14, 2007 at 2:00 PM
ok first of these are rated at 125rms each. i'm thinking about running parallel which gives me 1.33333ohm, series would be 12ohm. my question is what size amp to drive these that's stable at 1ohm? do I look for 125watts or total the 3 so like 400watts? this part has always confused me. Also I have a mono alpine 350 would this be fine if I change my mind and just run 2 of these?
Replies:
Posted By: 2fas4ya
Date Posted: August 16, 2007 at 1:31 PM
look for a 1 ohm stable something around 400rms amp.. Or you could get another of the same subs and parallel/series them and get a 2 ohm amp at 500rms
Posted By: jvillefinest
Date Posted: August 21, 2007 at 10:16 AM
yes if you ran 2 of those 10w1 an alpine mrpm350 would work perfect.
-------------
2007 Acura TSX
SQ setup in the works
|