wiring a mono class d
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=96763
Printed Date: May 06, 2024 at 1:58 AM
Topic: wiring a mono class d
Posted By: badasschevillac
Subject: wiring a mono class d
Date Posted: August 30, 2007 at 1:34 AM
ok i have 4 kicker 15" solobarics, dual 4 ohm. now i know if i run them all in series to a one channel mono class d or any one channel amp (in this case a hifonics brutus bxi2006d), i know that my final ohm load going to the amp will be 2 ohms. now my question is if my amp is rated at lets say 1300 watts @ 2ohms (2000 watts @ 1 ohm), does that mean that all my subs will each get 1300 watts a piece or will that 1300 watts be divided up equally between the 4 subs? thanks any help would be appreciated
-------------
Replies:
Posted By: badasschevillac
Date Posted: August 30, 2007 at 2:17 AM
 -------------
Posted By: badasschevillac
Date Posted: August 30, 2007 at 2:18 AM
like that ^
-------------
Posted By: haemphyst
Date Posted: August 30, 2007 at 8:06 AM
That's actually series parallel. If you wired it all in series, you'd have 32 ohms.
And the power is split between them.
-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
Posted By: badasschevillac
Date Posted: August 30, 2007 at 7:26 PM
thanks!
-------------
|