1978 corvette, din radio

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97733
Printed Date: July 07, 2025 at 5:32 AM

Topic: 1978 corvette, din radio

Posted By: vdo-dayton
Subject: 1978 corvette, din radio
Date Posted: October 06, 2007 at 5:12 PM

Hello, all I need a bit of help with this one. I am trying to install an aftermarket single din radio into a 1978 corvette. I know that the radio bezel has to be cut but how do I get the bezel off. I took out the four screws on the bezel but can't find any more and don't want to just pull on the bezel for fear for breaking it. Anyone out there done one of these before?

thanks

-------------
vdo-dayton

Replies:

Posted By: tcss
Date Posted: October 06, 2007 at 9:39 PM

I think you have to take the screws around the gauges above the bezel and the whole upper console comes off. Not 100% sure it's been a while.

-------------
There is no such thing as free installation!

Print Page | Close Window