06 jeep commander deck

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97830
Printed Date: May 17, 2024 at 9:56 PM

Topic: 06 jeep commander deck

Posted By: qwkwrx
Subject: 06 jeep commander deck
Date Posted: October 10, 2007 at 9:28 AM

Installing an aftermarket radio in it and using a metra chto-013. This harness is supposed to convert the 4channels of audio to the 2 channels to go to the factory amp and also supply vss and all that for in-dash nav. The problem is, after driving for a while, the volume will drop on its own. This is an alpine cda-9883 not a nav deck. Ive tried two different modules and two different decks. Has anyone heard of any problems with this harness/module??

Replies:

Posted By: Velocity Motors
Date Posted: October 11, 2007 at 8:00 AM

I've installed into a few of the Commanders and we use the PAC CHY modules and they have been great. YOu can use these modules for the Boston or Non-Boston systems alike.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window