popping noise
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97832
Printed Date: June 12, 2024 at 3:31 AM
Topic: popping noise
Posted By: wes5314
Subject: popping noise
Date Posted: October 10, 2007 at 10:15 AM
I have pioneer 850-mp and 2 audiobahn 1200q's wired at 4ohm ,2 mtx 2300 ,my problem is when i turn my volume from 0 to 1 my speakers pop ,even when changing radio stations it does the same thing any ideas?
-------------
wes5314
Replies:
Posted By: DYohn
Date Posted: October 10, 2007 at 10:42 AM
Sounds like bad grounds. ------------- Support the12volt.com
Posted By: sarcomax
Date Posted: October 10, 2007 at 10:45 AM
I would say grounding issues, either the ground for the radio itself, or the all to common pioneer rca connection issue. The ground (outer) portion of the rca's has a very easy to blow fuse on it. The fix is to attach a wire to the outer shield and then attach the other end to ground. Good luck!
-------------
Posted By: wes5314
Date Posted: October 10, 2007 at 2:53 PM
yeah thats what i thought to so i hooked up a ground and attached to rca's and still does it ,It also does it when u turn it on so i went as far as to make sure the radio was grounded so i sanded the metal down and still have the problems , I hooked up a noise filter and still has popping noise , I was also thinking maybe bad rca's ....
-------------
wes5314
|