Print Page | Close Window

pac aoem gm24 or loc

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=97833
Printed Date: May 16, 2024 at 2:35 AM


Topic: pac aoem gm24 or loc

Posted By: jlemoine
Subject: pac aoem gm24 or loc
Date Posted: October 10, 2007 at 11:04 AM

I am going to add an amp to my bose system in a 2004 Silverado Vrew Cab. I was wondering which would give me better SQ, the PAC AOEM-GM24 or if I should just tap into the wires going into the factory sub with a regular LOC. Or if there is a better solution short of ripping the enitre Bose system out and starting fresh, please let me know. I may eventually re-do everything but for now I am trying to get the most bang for the buck with what I have to work with.

Thanks,

Jason




Replies:

Posted By: Velocity Motors
Date Posted: October 11, 2007 at 7:59 AM
For all Bose systems we use the REQ LOC which converts the low level speaker outputs at the deck to usable RCA output with a designated subwoofer output and fronts.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: jlemoine
Date Posted: October 11, 2007 at 9:16 AM
where can i find one of these?


Print Page | Close Window